TM 5-2410-240-23-3
0242
ASSEMBLY CONTINUED
000242
WARN I N G
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
6. Apply sealing compound to threads of shaft (Figure 17, Item 3) and install new locknut (Figure 17, Item 1) on
shaft (Figure 17, Item 3).
7. Tighten locknut (Figure 17, Item 1) until height of seat (Figure 17, Item 2) is 0.5 in. (13 mm).
Figure 17. Brake Pedal Pivot Shaft Locknut.
0242
