TM 5-2410-240-23-3
0248
A/C HOSE INSTALLATION CONTINUED
N OT E
Remove caps or plugs from A/C hoses and receiver dryer.
Install A/C hoses and receiver dryer as noted during removal.
7. Install clamp (Figure 17, Item 2) on receiver dryer (Figure 17, Item 5).
8. Install clamp (Figure 17, Item 3) on A/C hose (Figure 17, Item 7).
9. Install A/C hose (Figure 17, Item 7), receiver dryer (Figure 17, Item 5), two clamps (Figure 17, Items 2 and 3),
one washer (Figure 17, Item 13), and nut (Figure 17, Item 12) on machine (Figure 17, Item 1).
10. Install new O-ring (Figure 17, Item 10) on A/C hose (Figure 17, Item 11) and apply refrigerant compressor
lubricating oil on O-ring.
11. Loosely connect A/C hose (Figure 17, Item 11) on receiver dryer (Figure 17, Item 5).
12. Install convoluted tube (Figure 17, Item 4) on A/C hose (Figure 17, Item 8).
13. Install new O-ring (Figure 17, Item 9) on A/C hose (Figure 17, Item 8) and apply refrigerant compressor
lubricating oil on O-ring.
14. Loosely connect A/C hose (Figure 17, Item 8) on receiver dryer (Figure 17, Item 5).
15. Tighten two fittings (Figure 17, Item 6).
Figure 17. A/C Hoses, O-rings, Receiver Dryer and Retaining Hardware on Condenser Assembly.
0248