TM 5-2410-240-23-3
0262
REMOVAL CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
N OT E
Angle cylinder weighs approximately 100 lb (45 kg).
12. Using lifting device and assistance, remove angle cylinder (Figure 4, Item 10) from machine.
13. Place angle cylinder (Figure 4, Item 10) on flat surface and remove lifting device.
Figure 4. Angle Cylinder, Retaining Hardware, and Lubrication Hose.
0262
END OF TASK
