TM 5-2410-240-23-3
0266
REMOVAL
000266
1. Remove three bolts (Figure 1, Item 2), washers (Figure 1, Item 3), and plate (Figure 1, Item 4) from winch
(Figure 1, Item 1).
Figure 1. Plate and Retaining Hardware on Right Side of Winch.
0266
WARN I N G
Lubricating/hydraulic oils used in performance of maintenance can be very slippery.
Immediately wipe up any spills. Failure to follow this warning may cause injury to
personnel.
C AU T I O N
Cap or plug all hydraulic hoses and fittings during removal to protect against
contamination. Failure to follow this caution may result in damage to equipment.
N OT E
Tag and mark all hoses, fittings, and electrical connectors to aid installation.
Note routing of hoses and electrical harness to aid installation.
Note orientation of fittings to aid installation.