TM 5-2410-240-23-3
0270
REMOVAL CONTINUED
N OT E
Note position of clamp, washer, bolt, and spacer to aid installation.
3. Remove clamp (Figure 2, Item 1), shield (Figure 2, Item 2), bolt (Figure 2, Item 3), washer (Figure 2, Item 6),
clamp (Figure 2, Item 4), and spacer (Figure 2, Item 7) from cylinder (Figure 2, Item 9). Set hose (Figure 2,
Item 5) aside.
4. Remove three bolts (Figure 2, Item 13), washers (Figure 2, Item 12), two shields (Figure 2, Item 11), two
flanges (Figure 2, Item 8), and hose (Figure 2, Item 14) from cylinder (Figure 2, Item 9).
5. Remove O-ring (Figure 2, Item 10) from hose (Figure 2, Item 14). Discard O-ring.
Figure 2. Ripper Lift Cylinder Hydraulic Line - Front.
0270