TM 5-2410-241-23-1
0020
Table 1. Powertrain Troubleshooting Procedures - Continued.
0020
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1401-6 Transmission Sole-
4. Remove two bolts (Figure 42,
noid Valve #1 Current
Item 3) and guard (Figure 42,
Above Normal - Contin-
Item 4) from machine.
ued
5. Remove 15 bolts (Figure 42,
Item 1) and plate (Figure 42,
Item 2) from machine.
Figure 42. Guard, Plate, and Retaining Hardware.
0020
6. Disconnect transmission solenoid
valve #1 connector P-C4 (WP
0018, Figure 71) from transmis-
sion solenoid valve #1 (WP 0145).
7. Turn ignition switch and battery
disconnect switch to ON position
(TM 5-2410-241-10).
8. Check for Diagnostic Codes (WP
1. If active 1401-5 code is present,
replace transmission solenoid
valve #1 (WP 0145). Ensure all
harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
2. If active 1401-6 code is present,
proceed to step 9.
9. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).