TM 5-2410-241-23-1
0020
Table 1. Powertrain Troubleshooting Procedures - Continued.
0020
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1401-13 Transmission Sole-
1. Connect MSD (WP 0016), select
1. If active 1401-13 code is present,
noid Valve #1 Out of Cali-
Powertrain D7 ECM, and check for
proceed to step 2.
bration
Diagnostic Codes or Event Codes
2. If no active codes are present, the
problem does NOT exist at this
time. Resume normal operation.
2. Select Powertrain D7 ECM on the
left side of screen.
3. Select Service (Figure 43, Item 1),
Calibrations (Figure 43, Item 2),
Transmission Fill Calibration (Fig-
ure 43, Item 3).
Figure 43. ECM Selection.
0020
4. Set up Calibration Requirements.