TM 5-2410-241-23-1
0020
Table 1. Powertrain Troubleshooting Procedures - Continued.
0020
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1402-13 Transmission Sole-
1. Connect MSD (WP 0016), select
1. If active 1402-13 code is present,
noid Valve #2 Out of Cali-
Powertrain D7 ECM, and check for
proceed to step 2.
bration
Diagnostic Codes or Event Codes
2. If no active codes are present, the
problem does NOT exist at this
time. Resume normal operation.
2. Select Powertrain D7 ECM on the
left side of screen.
3. Select Service (Figure 52, Item 1),
Calibrations (Figure 52, Item 2),
Transmission Fill Calibration (Fig-
ure 52, Item 3).
Figure 52. ECM Selection.
0020
4. Set Up Calibration Requirements.