TM 5-2410-241-23-2
0112
REMOVAL CONTINUED
N OT E
Implement pump weighs approximately 150 lb (68 kg).
5. Attach suitable lifting device to implement pump (Figure 1, Item 2).
6. Using lifting device, remove two bolts (Figure 1, Item 15), washers (Figure 1, Item 16) and implement pump
(Figure 1, Item 2) from engine (Figure 1, Item 1).
7. Place implement pump (Figure 1, Item 2) on flat level surface. Remove lifting device from implement pump.
8. Remove O-ring (Figure 1, Item 17) from implement pump (Figure 1, Item 2). Discard O-ring.
9. Remove bolt (Figure 1, Item 4), washer (Figure 1, Item 5) and bracket (Figure 1, Item 7) from engine (Figure 1,
Item 1).
Figure 1. Implement Pump.
0112
END OF TASK
CLEANING AND INSPECTION
000112
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
