TM 5-2410-241-23-2
0148
REMOVAL
000148
WARN I N G
Oil should be warm to ensure it drains completely. Use caution to protect against burns
when draining oil.
Contact with oil can damage skin. Wear gloves when handling oil. If oil contacts skin, wash
it off immediately.
Lubricating oil is very slippery. Immediately wipe up any spills.
Failure to follow these warningsmay cause injury to personnel.
N OT E
Care must be taken to ensure that fluidsare contained during performance of inspection,
maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid
with suitable containers before opening any compartment or disassembling any
component containing fluids.
Dispose of all fluids accordingto local regulations and mandates.
Tag and mark hoses to aid installation.
1. Position drain pan under torque converter housing (Figure 1, Item 6).
2. Remove four bolts (Figure 1, Item 2), washers (Figure 1, Item 3), two flanges (Figure 1, Item 4), and hose
(Figure 1, Item 1) from torque converter housing (Figure 1, Item 6).
3. Remove O-ring (Figure 1, Item 5) from hose (Figure 1, Item 1). Discard O-ring and position hose aside.
Figure 1. Hose.
0148
