TM 5-2410-241-23-2
0147
INSTALLATION
000147
1. Install new O-ring (Figure 5, Item 3) and new O-ring (Figure 5, Item 4) on two spool assemblies (Figure 5,
Item 2).
2. Install two spool assemblies (Figure 5, Item 2) on manifold (Figure 5, Item 1). Tighten spool to 37 lb-ft (50 Nm).
3. Install two coils (Figure 5, Item 7), washers (Figure 5, Item 5), and nuts (Figure 5, Item 6) on spool assembly
(Figure 5, Item 2). Tighten nut to 85 lb-in. (9.5 Nm).
.
Figure 5. Secondary Brake Parking Valve and First Coil.
0147