TM 5-2410-241-23-2
0147
INSTALLATION CONTINUED
4. Install O-rings (Figure 6, Item 2) and O-ring (Figure 6, Item 3) on spool assembly (Figure 6, Item 4).
5. Install spool assembly (Figure 6, Item 4) on manifold (Figure 6, Item 1). Tighten spool to 37 lb-ft (50 Nm).
6. Install coil (Figure 6, Item 7), washer (Figure 6, Item 6), and nut (Figure 6, Item 5) on spool assembly (Figure 6,
Item 4). Tighten nut to 85 lb-in. (9.5 Nm).
Figure 6. Solenoid Valve.
0147
7. Install four new O-rings (Figure 7, Item 2) on control valve (Figure 7, Item 1).
Figure 7. Control Valve Seals.
0147