TM 5-2410-241-23-2
0147
REMOVAL CONTINUED
9. Remove two nuts (Figure 4, Item 6), washers (Figure 4, Item 5), and coils (Figure 4, Item 7) from spool
assembly (Figure 4, Item 2).
10. Remove two spool assemblies (Figure 4, Item 2) from manifold (Figure 4, Item 1).
11. Remove O-rings (Figure 4, Item 3) and O-ring (Figure 4, Item 4) from each spool assembly (Figure 4, Item 2).
Discard O-rings
.
Figure 4. Secondary Brake Parking Valve and First Coil.
0147
END OF TASK
CLEANING AND INSPECTION
000147
N OT E
After cleaning, allow parts to air dry. Do not use rags. Rags may cause lint to be deposited
on parts. Perform cleaning and inspection and assembly on a clean surface.
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
