8
TM 5-2410-241-23-2
FIELD MAINTENANCE INSTRUCTIONS
-
TRANSMISSION SYSTEM OIL FILTER BASE REPLACEMENT
0153
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Tools and Special Tools
Materials/Parts - Continued
0
0
Tool Kit, General Mechanic's
Tag, Marker (WP 0303, Item 34)
0
(WP 0302, Item 65)
0
Tiedown Strap (WP 0303, Item 36)
0
Drain, Pan (S0255) (WP 0302, Item 68)
0
O-ring (9)
0
Gloves, Rubber (S0208)
References
0
(WP 0302, Item 68)
0
LO 5-2410-241-13
0
Wrench, Open End, 1-1/2" and 1-5/8" (S0853)
0
(WP 0302, Item 68)
WP 0295
0
Wrench, Open End, 1-7/8" and 2" (S0855)
Equipment Condition
0
0
(WP 0302, Item 68)
Machine parked (TM 5-2410-241-10)
0
Materials/Parts
0
0
Oil, Lubricating OEA, Arctic
Drawing Required
0
(WP 0303, Item 17)
0
TM 5-2410-241-24P, Figure 53
0
Oil, Lubricating OE/HDO-10
(WP 0303, Item 18)
0
Estimated Time to Complete
0
Oil, Lubricating OE/HDO-30
1.5 Hr
0
0
(WP 0303, Item 19)
Rag, Wiping (WP 0303, Item 24)
0
REMOVAL
000153
WARN I N G
Oil should be warm to ensure it drains competely. Use caution to protect against burns,
l
when draining oil.
Contact with oil can damage skin. Wear gloveswhen handling oil. If oil contacts skin, wash
it off immediately.
Lubricating oil is very slippery. Immediately wipe up any spills.
Failure to follow these warningsmay cause injury to personnel.
N OT E
Care must be taken to ensure that fluids ae contained during performance of inspection,
r
maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid
with suitable containers before opening any compartment or disassembling any
component containing fluids.
Dispose of all fluids accordingto local regulations and mandates.
0153-1