TM 5-2410-241-23-3
0221
CLEANING AND INSPECTION
000221
1. Clean all parts IAW Mechanical General Maintenance Instructions (WP 0295).
2. Inspect heater coil (Figure 4, Item 2) for cracks, damage, or coolant leakage. Replace heater coil.
3. Inspect heater coil (Figure 4, Item 2) for bent fins (Figure 4, Item 1). Bent fins may be gently straightened by
use of a small screwdriver.
4. Inspect inlet pipe (Figure 4, Item 4) and outlet pipe (Figure 4, Item 3) for cracks, breaks, broken welds, coolant
leakage of deformity. Replace heater coil.
Figure 4. Heater Coil Inspection.
0221
INSTALLATION
000221
1. Install grommet (Figure 3, Item 3) and heater coil (Figure 3, Item 1) on platform (Figure 3, Item 2).