TM 5-2410-241-23-3
0242
ACCUMULATOR HOSE TO EVAPORATOR COIL INSTALLATION
000242
N OT E
Coat new O-rings with clean refrigerant oil before installation.
Install hoses as tagged during removal.
1. Install hose (Figure 5, Item 8) on machine.
2. Install grommet (Figure 5, Item 9) on hose (Figure 5, Item 8).
3. Install new O-ring (Figure 5, Item 7) on hose (Figure 5, Item 8).
4. Connect hose (Figure 5, Item 8) on evaporator coil (Figure 5, Item 6) and tighten nut (Figure 5, Item 5).
5. Install new gasket (Figure 5, Item 4), cover (Figure 5, Item 3), four washers (Figure 5, Item 1), and bolts
(Figure 5, Item 2) on platform.
Figure 5. Evaporator Coil.
0242
