TM 5-2410-241-23-3
0251
REMOVAL CONTINUED
7. Remove key (Figure 3, Item 5) from shaft (Figure 3, Item 2).
8. Remove shaft (Figure 3, Item 2) from bracket (Figure 3, Item 6) and cab.
9. Remove handle (Figure 3, Item 1) from shaft (Figure 3, Item 2).
10. Remove bumper (Figure 3, Item 7) from bracket (Figure 3, Item 6).
11. Remove four bolts (Figure 3, Item 4), washers (Figure 3, Item 3) and bracket (Figure 3, Item 6) from cab.
Figure 3. Latch Assembly.
0251
12. Remove rubber washer seal (Figure 4, Item 1) from cab. Discard rubber washer seal.
Figure 4. Cab.
0251
END OF TASK
