TM 5-2410-241-23-3
0265
REMOVAL CONTINUED
Lubricating/hydraulic oils used in performance of maintenance can be very slippery.
Immediately wipe up any spills. Failure to follow this warning may result in injury to
personnel.
N OT E
Tag all hoses, tubes, and fittings to aid installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid
IAW local policy and ordinances.
Note routing of hoses and lines to aid installation.
10. Remove eight bolts (Figure 4, Item 7), washers (Figure 4, Item 6), and disconnect two hoses (Figure 4, Items 2
and 3) from manifold (Figure 4, Item 1).
11. Remove four flanges (Figure 4, Item 4) and two O-rings (Figure 4, Item 5) from two hoses (Figure 4, Items 2
and 3). Discard O-rings.
Figure 4. Lower Hose Connection.
0265
END OF TASK
CLEANING AND INSPECTION
000265
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
INSTALLATION
000265
N OT E
Install tubes and fittings as noted during removal.