TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0041-04 8 Volt DC Supply Voltage
13. Using a digital multimeter (WP
Continuity - Engine control wiring
Below Normal Continued
0283), test for continuity
harness is shorted. Replace
between engine ECM har-
engine control wiring harness
ness connector E-C1
(WP 0052).
(WP 0018, Figure 102) termi-
Connect E-C4 (WP 0018,
nal 10 and all other terminals
Figure 105) to engine speed sen-
in engine ECM harness con-
sor.
nector E-C1 (WP 0018,
Connect E-C3 (WP 0018,
Figure 102).
Figure 104) to speed (injection
pump position) sensor.
Connect E-C1 (WP 0018,
Figure 102) to engine ECM J2.
Verify proper operation of machine
(TM 5-2410-240-10).
No Continuity - Proceed to step
14.
14. Using a digital multimeter (WP
Continuity - Engine control wiring
0283), test for continuity
harness is shorted. Replace
between engine ECM har-
engine control wiring harness
ness connector E-C1
(WP 0052).
(WP 0018, Figure 102) termi-
Connect E-C4 (WP 0018,
nal 10 and ground.
Figure 105) to engine speed sen-
sor.
Connect E-C3 (WP 0018,
Figure 104) to speed (injection
pump position) sensor.
Connect E-C1 (WP 0018,
Figure 102) to engine ECM J2.
Verify proper operation of machine
(TM 5-2410-240-10).
No Continuity - ECM faulty,
Replace engine ECM (WP 0049).
Verify proper operation of machine
(TM 5-2410-240-10).
0019-57