TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0006-06 Cylinder #6 Injector Current
Test Step 3: Test Forward Fuel
Above Normal Continued
Injector Harness.
1. Turn ignition and battery dis-
connect switch to OFF posi-
tion (TM 5-2410-240-10).
2. Remove valve cover
(WP 0104).
3. Disconnect forward fuel injec-
tor harness terminal F-T33
and terminal F-T44 (WP 0018,
Figure 271) from fuel injector
#6.
4. Using digital multimeter
Continuity - Forward fuel injector
(WP 0283), test for continuity
harness is shorted. Replace for-
between F-C1 (WP 0018,
ward fuel injector harness
Figure 146) harness connec-
(WP 0104). Verify proper operation
tor terminal 1 and all other ter-
of machine (TM 5-2410-240-10).
minals in F-C1 (WP 0018,
No Continuity - Proceed to step 5.
Figure 146) harness connec-
tor.
5. Using digital multimeter
Continuity - Forward fuel injector
(WP 0283), test for continuity
harness is shorted. Replace for-
between F-C1 (WP 0018,
ward fuel injector harness
Figure 146) harness connec-
(WP 0104). Verify proper operation
tor terminal 1 and ground.
of machine (TM 5-2410-240-10).
No Continuity - Proceed to step 6.
6. Using digital multimeter
Continuity - Forward fuel injector
(WP 0283), test for continuity
harness is shorted. Replace for-
between F-C1 (WP 0018,
ward fuel injector harness
Figure 146) harness connec-
(WP 0104). Verify proper operation
tor terminal 2 and all other ter-
of machine (TM 5-2410-240-10).
minals in F-C1 (WP 0018,
No Continuity - Proceed to step 7.
Figure 146) harness connec-
tor.
0019-53
