TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0262-04 5-Volt Sensor DC Supply
2. Turn ignition switch to OFF
Voltage Below Normal Code Con-
position (TM 5-2410-240-10).
tinued
3. Disconnect the following sen-
sors:
a. Harness connector E-C7
(WP 0018, Figure 108)
from intake manifold
pressure sensor.
b. Harness connector E-C6
(WP 0018, Figure 107)
from fuel rail pressure
sensor.
c. Harness connector E-C5
(WP 0018, Figure 106)
from engine oil pressure
sensor.
d. Harness connector FF-C4
(WP 0018, Figure 150)
from prime pump temper-
ature sensor.
4. Turn ignition switch to ON
position (TM 5-2410-240-10).
N OT E
Wait at least 30 seconds for diagnostic codes to become active.
5. Using MSD (WP 0016), select
0262-04 Remains Active - Pro-
engine ECM C6.6 D6K and
ceed to Test Step 2.
check if diagnostic code 0262-
0262-04 Becomes Inactive - Pro-
04 is active.
ceed to step 6.
6. Connect harness connector
E-C7 (WP 0018, Figure 108)
to intake manifold pressure
sensor.
0019-93