TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0262-04 5-Volt Sensor DC Supply
7. Using MSD (WP 0016), select
0262-04 Active - Replace air
Voltage Below Normal Code Con-
engine ECM C6.6 D6K and
(boost) pressure sensor
tinued
check if diagnostic code 0262-
(WP 0055).
04 is active.
Connect E-C6 (WP 0018,
Figure 107) to fuel rail pressure
sensor.
Connect E-C5 (WP 0018,
Figure 106) to engine oil pressure
sensor.
Connect FF-C4 (WP 0018, Figure
150) to prime pump temperature
sensor.
Verify proper operation of machine
(TM 5-2410-240-10).
0262-04 Remains Inactive - Pro-
ceed to step 8.
8. Connect harness connector
E-C6 (WP 0018, Figure 107)
to fuel rail pressure sensor.
0262-04 Active - Replace fuel rail
9. Using MSD (WP 0016), select
pressure sensor (WP 0059).
engine ECM C6.6 D6K and
check if diagnostic code 0262-
Connect E-C5 (WP 0018, Figure
04 is active.
106) to engine oil pressure sensor.
Connect FF-C4 (WP 0018, Figure
150) to prime pump temperature
sensor.
Verify proper operation of machine
(TM 5-2410-240-10).
0262-04 Remains Inactive - Pro-
ceed to step 10.
10. Connect harness connector
E-C5 (WP 0018, Figure 106)
to engine oil pressure sensor.
11. Using MSD (WP 0016), select
0262-04 Active - Replace engine
engine ECM C6.6 D6K and
oil pressure sensor (WP 0053).
check if diagnostic code 0262-
Connect FF-C4 (WP 0018, Figure
04 is active.
150) to prime pump temperature
sensor.
Verify proper operation of machine
(TM 5-2410-240-10).
0262-04 Remains Inactive -
Replace prime pump temperature
sensor (WP 0070).
0019-94