TM 5-2410-240-23-1
0020
Table 2. Powertrain and Chassis Troubleshooting with Codes - Continued.
CID FMI CODE
Test or Inspection
Corrective Action
1482-03 Sensor Power Sup-
21. For D6K Dozer with Winch, dis-
ply (10 VDC) Voltage Above
connect platform harness connec-
Normal - Continued
tor PL-C33 (WP 0018, Figure
233) from winch solenoid harness
connector WC-C2 (WP 0018, Fig-
ure 249).
22. Using digital multimeter (WP
Continuity - Proceed to step 23.
0283), test for continuity between
No Continuity - Replace platform wir-
pin 45 on platform harness to cab
ing harness (WP 0150, WP 0155).
harness connector PL-C1 (WP
Ensure all harness connectors are
0018, Figure 214) and pin 69 on
reconnected. Verify proper operation
platform harness ECM J1 connec-
of machine (TM 5-2410-240-10).
tor PL-C4 (WP 0018, Figure 217).
23. Using digital multimeter (WP
No Continuity - Proceed to step 24.
0283), test for continuity between
Continuity - Replace platform wiring
pin 69 on platform harness ECM
harness (WP 0150, WP 0155).
J1 connector PL-C4 (WP 0018,
Ensure all harness connectors are
Figure 217) and all other pins on
reconnected. Verify proper operation
platform harness ECM J1 connec-
of machine (TM 5-2410-240-10).
tor PL-C4 (WP 0018, Figure 217).
24. Using digital multimeter (WP
No Continuity - Proceed to step 25.
0283), test for continuity between
Continuity - Replace platform wiring
pin 69 on platform harness ECM
harness (WP 0150, WP 0155).
J1 connector PL-C4 (WP 0018,
Ensure all harness connectors are
Figure 217) and all other pins on
reconnected. Verify proper operation
platform harness ECM J2 connec-
of machine (TM 5-2410-240-10).
tor PL-C5 (WP 0018, Figure 218).
25. Using digital multimeter (WP
No Continuity - For D6K Dozer with
0283), test for continuity between
Winch, proceed to step 26.
pin 69 on platform harness ECM
No Continuity - For D6K Dozer with
J1 connector PL-C4 (WP 0018,
Ripper, replace machine ECM (WWP
Figure 217) and all pins on plat-
0147). Ensure all harness connectors
form harness connector PL-C2
are reconnected. Verify proper opera-
(WP 0018, Figure 215).
tion of machine (TM 5-2410-240-10).
Continuity - Replace platform wiring
harness (WP 0150, WP 0155).
Ensure all harness connectors are
reconnected. Verify proper operation
of machine (TM 5-2410-240-10).
26. Using digital multimeter (WP
Continuity - Proceed to step 27.
0283), test for continuity between
No Continuity - Replace platform wir-
pin 69 on platform harness ECM
ing harness (WP 0150, WP 0155).
J1 connector PL-C4 (WP 0018,
Ensure all harness connectors are
Figure 217) and pin 9 on platform
reconnected. Verify proper operation
harness connector PL-C33 (WP
of machine (TM 5-2410-240-10).
0018, Figure 249).
0020-74