TM 5-2410-240-23-1
0020
Table 2. Powertrain and Chassis Troubleshooting with Codes - Continued.
CID FMI CODE
Test or Inspection
Corrective Action
1482-04 Sensor Power Sup-
6. Reconnect seat harness to cab
ply (10 VDC) Voltage Below
harness connector CA-C1 (WP
Normal - Continued
0018, Figure 69) on cab harness
to seat harness connector C-C24
(WP 0018, Figure 26).
7. Disconnect seat harness steering
and transmission control handle
base connector CA-C5 (WP 0018,
Figure 71) from left joystick con-
trol (WP 0239).
1482-04 Code Active - Proceed to
8. Check for diagnostic codes
step 9.
1482-04 Code Not Active - Replace
transmission control handle base (WP
0239). Ensure all harness connectors
are reconnected. Verify proper opera-
tion of machine (TM 5-2410-240-10).
9. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-240-10).
10. Disconnect seat harness steering
and transmission control handle
connector CA-C6 (WP 0018, Fig-
ure 72) from left joystick control
(WP 0239).
11. Check for diagnostic codes (WP
1482-04 Code Active - Proceed to
step 12.
1482-04 Code Not Active - Replace
transmission control handle (WP
0239). Ensure all harness connectors
are reconnected. Verify proper opera-
tion of machine (TM 5-2410-240-10).
12. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-240-10).
13. Disconnect seat harness blade
control handle connector CA-C7
(WP 0018, Figure 73) from right
joystick control (WP 0240).
14. Check for diagnostic codes (WP
1482-04 Code Active - Proceed to
step 15.
1482-04 Code Not Active - Replace
bulldozer control handle (WP 0240).
Ensure all harness connectors are
reconnected. Verify proper operation
of machine (TM 5-2410-240-10).
0020-76