TM 5-2410-240-23-1
0020
Table 2. Powertrain and Chassis Troubleshooting with Codes - Continued.
CID FMI CODE
Test or Inspection
Corrective Action
1482-04 Sensor Power Sup-
15. Turn ignition switch and battery
ply (10 VDC) Voltage Below
disconnect switch to OFF position
Normal - Continued
(TM 5-2410-240-10).
16. Disconnect seat harness blade
control handle connector CA-C8
(WP 0018, Figure 74) from right
joystick control (WP 0240).
1482-04 Code Active - Replace seat
17. Check for diagnostic codes (WP
wiring harness (WP 0236). Ensure all
harness connectors are reconnected.
Verify proper operation of machine
(TM 5-2410-240-10).
1482-04 Code Not Active - Replace
bulldozer control handle base (WP
0240). Ensure all harness connectors
are reconnected. Verify proper opera-
tion of machine (TM 5-2410-240-10).
18. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-240-10).
19. Disconnect cab harness connec-
tor C-C49 (WP 0018, Figure 36)
from ripper/winch handle.
20. Check for diagnostic codes
1482-04 Code Active - For D6K
Dozer with Winch, proceed to step 21.
1482-04 Code Active - For D6K
Dozer with Ripper, proceed to step 29.
1482-04 Code Not Active - Replace
bulldozer control handle base (WP
0240). Ensure all harness connectors
are reconnected. Verify proper opera-
tion of machine (TM 5-2410-240-10).
21. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-240-10).
22. Disconnect platform harness con-
nector PL-C33 (WP 0018, Figure
233) from winch solenoid harness
connector WC-C2 (WP 0018, Fig-
ure 249).
23. Check for diagnostic codes (WP
1482-04 Code Active - Proceed to
step 29.
1482-04 Code Not Active - Proceed
to step 24.
0020-77