TM 5-2410-240-23-1
0021
Table 2. Cab Troubleshooting With Codes. - Continued.
0021
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2113-04 Operator In Seat Switch
12. Using digital multimeter, test
No Continuity - Replace lower
Voltage Below Normal - Continued
for continuity (WP 0283)
cab harness (WP 0228). Ensure all
between harness connector
harness connectors are recon-
C-C12 (WP 0018, Figure 22)
nected. Verify proper operation of
terminal 3 and harness con-
machine (TM 5-2410-240-10).
nector C-C23 (WP 0018, Fig-
Continuity - Proceed to step 13.
ure 25) terminal 2.
13. Using digital multimeter, test
No Continuity - Proceed to
for continuity (WP 0283)
step 14.
between harness connector
Continuity - Replace lower cab
C-C12 (WP 0018, Figure 22)
harness (WP 0228). Ensure all
terminal 2 and all other termi-
harness connectors are recon-
nals in harness connector C-
nected. Verify proper operation of
C12 (WP 0018, Figure 22).
machine (TM 5-2410-240-10).
14. Using digital multimeter, test
No Continuity - Proceed to
for continuity (WP 0283)
step 15.
between harness connector
Continuity - Replace lower cab
C-C12 (WP 0018, Figure 22)
harness (WP 0228). Ensure all
terminal 3 and all other termi-
harness connectors are recon-
nals in harness connector C-
nected. Verify proper operation of
C12 (WP 0018, Figure 22).
machine (TM 5-2410-240-10).
15. Disconnect harness connec-
tor PL-C5 (WP 0018, Figure
218) from equipment ECM J2.
16. Using digital multimeter, test
No Continuity - Replace platform
for continuity (WP 0283)
wiring harness (WP 0150,
between harness connector
WP 0155). Ensure all harness con-
PL-C5 (WP 0018, Figure 218)
nectors are reconnected. Verify
terminal 44 and harness con-
proper operation of machine
nector PL-C1 (WP 0018, Fig-
(TM 5-2410-240-10).
ure 214) terminal 3.
Continuity - Proceed to step 17.
17. Using digital multimeter, test
No Continuity - Replace platform
for continuity (WP 0283)
wiring harness (WP 0150,
between harness connector
WP 0155). Ensure all harness con-
PL-C5 (WP 0018, Figure 218)
nectors are reconnected. Verify
terminal 45 and harness con-
proper operation of machine
nector PL-C1 (WP 0018, Fig-
(TM 5-2410-240-10).
ure 214) terminal 2.
Continuity - Proceed to step 18.
18. Using digital multimeter, test
No Continuity - Proceed to
for continuity (WP 0283)
step 19.
between harness connector
Continuity - Replace platform wir-
PL-C5 (WP 0018, Figure 218)
ing harness (WP 0150,
terminal 45 and all other termi-
WP 0155). Ensure all harness con-
nals in harness connector PL-
nectors are reconnected. Verify
C5 (WP 0018, Figure 218).
proper operation of machine
(TM 5-2410-240-10).
0021-236