TM 5-2410-240-23-1
0023
Table 2. Blade, Winch, and Ripper Troubleshooting With Codes - Continued.
0023
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
1884-06 Winch Spool In
4. Check for active code 1884-05 or
Code 1884-06 Remains Active - Pro-
Solenoid Current Above
1884-06 in machine control D6K
ceed to Test Step 4.
Normal - Continued
ECM (WP 0016).
Code 1884-06 Becomes Inactive
and 1884-05 Becomes Active -
Replace engine wiring harness (WP
0046).
Connect pump wiring harness con-
nector PH-C8 on reel-in solenoid (WP
0018, Figure 212) (WP 0267).
Install front floor plate on machine
(WP 0205).
Proceed to step 5.
5. Using MSD (WP 0016), select
Code 1884-06 Active - Repeat trou-
machine control D6K ECM and
bleshooting code from the beginning.
verify 1884-06 is not active.
Code 1884-06 Not Active - Trouble-
shooting complete.
Test Step 4. Test F869-PK Reel-In
Solenoid Supply Circuit for Short
to Other Circuits in Platform Wiring
Harness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-240-10).
2. Disconnect platform wiring har-
ness connector PL-C2 (WP 0018,
Figure 215) from equipment ECM
(WP 0148).
3. Disconnect platform wiring har-
ness connector PL-C5 (WP 0018,
Figure 218) from ECM J2 (WP
0149).
4. Disconnect platform wiring har-
ness connector PL-C4 (WP 0018,
Figure 217) from ECM J1 (WP
0149).
0023-100