TM 5-2410-240-23-1
0023
Table 2. Blade, Winch, and Ripper Troubleshooting With Codes - Continued.
0023
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
1884-06 Winch Spool In
Test Step 2. Test for Shorted Pump
Solenoid Current Above
Wiring Harness.
Normal - Continued
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-240-10).
2. Remove right side debris guards
from machine (WP 0187).
3. Disconnect pump wiring harness
connector PH-C1 (WP 0018, Fig-
ure 205) from engine wiring har-
ness connector EN-C21 (WP
0018, Figure 137) (WP 0046).
4. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-2410-240-10).
Code 1884-06 Remains Active - Pro-
5. Check for active code 1884-05 or
ceed to Test Step 3.
1884-06 in machine control D6K
ECM (WP 0016).
Code 1884-06 Becomes Inactive
and 1884-05 Becomes Active -
Replace pump wiring harness (WP
0046).
Proceed to step 6.
6. Using MSD (WP 0016), select
Code 1884-06 Active - Repeat trou-
machine control D6K ECM and
bleshooting code from the beginning.
verify 1884-06 is not active.
Code 1884-06 Not Active - Trouble-
shooting complete.
Test Step 3. Test for Shorted
Engine Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-240-10).
2. Disconnect engine wiring har-
ness connector EN-C50 (WP
0018, Figure 140) from platform
wiring harness connector PL-C32
(WP 0018, Figure 232) (WP
0046).
3. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-2410-240-10).
0023-99
