TM 5-2410-240-23-2
0047
REMOVAL CONTINUED
N OT E
Negative cable attaches to left side of NATO slave. Left side of NATO slave faces front of
machine. Positive cable attaches to right side of NATO slave. Right side of NATO slave
faces rear of machine.
Tag and mark electrical connectors and note cable routing to aid installation.
2. Remove two bolts (Figure 2, Item 5), lockwashers (Figure 2, Item 4), and cables (Figure 2, Item 6) from NATO
slave (Figure 2, Item 3). Discard lockwashers.
3. Remove screw (Figure 2, Item 1) and tether (Figure 2, Item 15) from cap (Figure 2, Item 2).
4. Remove cap (Figure 2, Item 2) from NATO slave (Figure 2, Item 3).
5. Loosen bolt (Figure 2, Item 14) and remove bracket (Figure 2, Item 10) from machine.
N OT E
Note orientation of gasket to aid installation.
6. Remove four nuts (Figure 2, Item 13), washers (Figure 2, Item 12), and inner gasket (Figure 2, Item 11) from
bracket (Figure 2, Item 10). Discard inner gasket.
N OT E
Note position of tether to aid installation.
Note orientation of gasket to aid installation.
7. Remove four bolts (Figure 2, Item 7), washers (Figure 2, Item 8), tether (Figure 2, Item 15), NATO slave
(Figure 2, Item 3), and outer gasket (Figure 2, Item 9) from bracket (Figure 2, Item 10). Discard outer gasket.
Figure 2. NATO Slave and Bracket.
0047