TM 5-2410-240-23-2
0072
PRIME PUMP LEVEL SENSOR PROBE REMOVAL CONTINUED
N OT E
Tag wires and wiring harnesses to aid installation.
2. Disconnect wire (Figure 2, Item 5) from sensor (Figure 2, Item 3). Position wire aside.
3. Position drain pan under machine and open drain valve (Figure 2, Item 4) on water separator (Figure 2, Item 1)
until fuel is completely drained.
4. Remove sensor (Figure 2, Item 3) from water separator (Figure 2, Item 1).
5. Remove O-ring (Figure 2, Item 2) from sensor (Figure 2, Item 3). Discard O-ring.
Figure 2. Prime Pump Level Sensor Probe.
0072
END OF TASK