4
TM 5-2410-240-23-2
FIELD MAINTENANCE
-
REAR HOUSING ASSEMBLY REPLACEMENT
0101
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
References
Tools and Special Tools
0
0
Tool Kit, General Mechanic's
WP 0282
0
(WP 0289, Item 51)
0
Equipment Conditions
0
Screwdriver Attachment, Torx, 3/8" Drive, T-30
Machine parked (TM 5-2410-240-10)
(S0288) (WP 0289, Item 53)
0
0
Flywheel housing removed (WP 0098)
Wrench, Torque, Click, Ratcheting, 3/8" Drive,
0
75 lb-ft (WP 0289, Item 59)
0
Drawings Required
0
Materials/Parts
TM 5-2410-240-24P, Figure 38
0
0
Rag, wiping (WP 0290, Item 21)
0
Estimated Time to Complete
0
1.0 Hr
0
REMOVAL
000101
N OT E
Crankshaft rear seal is integral to rear housing assembly. They are replaced as an
assembly.
Rear housing assembly is not serviceable. If removed, it must be replaced.
1. Remove eight screws (Figure 1, Item 2) from rear housing assembly (Figure 1, Item 1).
2. Remove four screws (Figure 1, Item 3) from rear housing assembly (Figure 1, Item 1).
3. Remove rear housing assembly (Figure 1, Item 1) from engine block (Figure 1, Item 4).
Figure 1. Rear Housing Assembly and Retaining Hardware.
0101