TM 5-2410-240-23-2
0104
INSTALLATION CONTINUED
000104
N OT E
Ensure harness assemblies are not in contact with rocker arms or pinched by valve cover.
2. Install new O-ring (Figure 7, Item 8), breather (Figure 7, Item 3), and four screws (Figure 7, Item 2) on valve
cover (Figure 7, Item 1).
3. Install valve cover (Figure 7, Item 1) and 15 bolts (Figure 7, Item 6) on valve cover base (Figure 7, Item 7).
Tighten bolts in sequence shown (Figure 7) to 79 lb-in. (9 Nm).
4. Connect breather hose (Figure 7, Item 5) on breather (Figure 7, Item 3) and tighten clamp (Figure 7, Item 4).
Figure 7. Valve Mechanism Cover.
0104
END OF TASK
FOLLOW-ON TASKS
000104
1. If arctic kit heater equipped, install arctic kit heater (WP 0278).
2. Install fuel injection lines (WP 0060).
3. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
0104-7/(8 blank)