TM 5-2410-240-23-2
0113
FRONT TRACK ROLLER COVER REMOVAL
000113
N OT E
The following procedure is for right side cover. Use the same procedure for left side cover.
Note size and location of bolts and washers for installation.
1. Remove bolt (Figure 3, Item 2), washer (Figure 3, Item 3), and access door (Figure 3, Item 1) from machine.
2. Loosen bolt (Figure 3, Item 12) and remove bolt (Figure 3, Item 10), washer (Figure 3, Item 9), and nylon
washer (Figure 3, Item 8) from machine.
3. Slide outer bracket (Figure 3, Item 11) forward and remove outer bracket from machine.
4. Remove two bolts (Figure 3, Item 5), two washers (Figure 3, Item 6), two nylon washers (Figure 3, Item 7) and
inner cover (Figure 3, Item 4) from machine.
Figure 3. Front Track Cover.
0113
END OF TASK