TM 5-2410-240-23-2
0134
REMOVAL CONTINUED
6. Remove nut (Figure 3, Item 5), washer (Figure 3, Item 4), bolt (Figure 3, Item 1), and washer (Figure 3, Item 2)
from two clamps (Figure 3, Item 3). Position clamps aside.
Figure 3. Tube Retaining Hardware on Right Hydrostatic Drive Piston Pump.
0134
N OT E
Tag and mark tube and fittings to aid installation.
Cap or plug tube and fittings.
7. Loosen two tube nuts (Figure 4, Items 1 and 5) and disconnect tube (Figure 4, Item 3) from fitting (Figure 4,
Item 4) and transmission control manifold (Figure 4, Item 2). Remove tube from machine.
Figure 4. Tube on Right Hydrostatic Drive Piston Pump and Transmission Control Manifold.
0134