TM 5-2410-240-23-2
0149
REMOVAL CONTINUED
N OT E
Tag and mark electrical connectors to aid installation.
5. Remove two caps (Figure 2, Item 4) from nuts (Figure 2, Item 1).
6. Loosen two screws (Figure 2, Item 3) and disconnect harness connectors (Figure 2, Item 6) from machine
ECM (Figure 2, Item 5).
7. Remove four nuts (Figure 2, Item 1), three washers (Figure 2, Item 2), outer bracket (Figure 2, Item 8), and
inner bracket (Figure 2, Item 7) from studs (Figure 2, Item 9).
Figure 2. Machine ECM, Harness Connectors, and Retaining Hardware.
0149