TM 5-2410-240-23-2
0157
LEFT SIDE ANGLE AND TILT TUBES REMOVAL CONTINUED
4. Disconnect brake hose (Figure 3, Item 5) from connector (Figure 3, Item 2) on left hydrostatic drive motor
(Figure 3, Item 1), remove O-ring from connector (Figure 3, Item 2), and position hose (Figure 3, Item 4) aside.
Discard O-ring.
5. Disconnect case drain hose (Figure 3, Item 4) from connector (Figure 3, Item 2) on left hydrostatic drive motor
(Figure 3, Item 1), remove O-ring (Figure 3, Item 3) from connector (Figure 3, Item 2), and position hose
(Figure 3, Item 4) aside. Discard O-ring.
Figure 3. Case Drain and Brake Hoses and O-ring.
0157