TM 5-2410-240-23-2
0157
LEFT SIDE ANGLE AND TILT TUBES REMOVAL CONTINUED
10. Disconnect two tube nuts (Figure 6, Item 3) from valve bank (Figure 6, Item 1), remove two O-rings (Figure 6,
Item 2) from two tube nuts (Figure 6, Item 3), and remove two tubes (Figure 6, Item 4) from machine. Discard
O-rings.
Figure 6. Tube Assembly.
0157
11. Disconnect left crossover tube nut (Figure 7, Item 2) from right tube (Figure 7, Item 1), and remove O-ring
(Figure 7, Item 4) from right side tube (Figure 7, Item 1).
12. Remove left crossover tube (Figure 7, Item 3) from machine.
Figure 7. Left Crossover Tube.
0157
END OF TASK