TM 5-2410-240-23-2
0157
RIGHT SIDE ANGLE AND TILT TUBES REMOVAL
000157
1. Remove right bulkhead bracket. Refer to Bulkhead Bracket Removal in this work package.
2. Disconnect two tube nuts (Figure 8, Item 4) from two crossover tubes (Figure 8, Item 1), and remove two O-
rings (Figure 8, Item 2) from crossover tubes (Figure 8, Item 1). Discard O-rings.
3. Remove two tubes (Figure 8, Item 3) from machine.
Figure 8. Right Side Short Tubes.
0157