TM 5-2410-240-23-2
0157
RIGHT SIDE ANGLE AND TILT TUBES REMOVAL CONTINUED
4. Disconnect crossover tube nut (Figure 9, Item 8) from right tube (Figure 9, Item 6), and remove O-ring
(Figure 9, Item 9) from crossover tube (Figure 9, Item 7). Discard O-ring.
5. Remove bolt (Figure 9, Item 4), washer (Figure 9, Item 5), clamp (Figure 9, Item 3), washer (Figure 9, Item 2),
and clamp (Figure 9, Item 1) from machine.
Figure 9. Right Side Long Tubes.
0157