TM 5-2410-240-23-2
0157
CROSSOVER TUBES INSTALLATION
000157
1. Position rear crossover tube (Figure 22, Item 1) and front crossover tube (Figure 22, Item 10) on machine.
2. Install two new O-rings (Figure 22, Item 8) and tube nuts (Figure 22, Item 7) on tube assemblies (Figure 22,
Item 9).
3. Install two new O-rings (Figure 22, Item 12) on two tubes (Figure 22, Item 11), and connect two tube nuts
(Figure 22, Item 13) to two tubes (Figure 22, Item 11).
4. Install three clamps (Figure 22, Item 2), washers (Figure 22, Item 6), clamps (Figure 22, Item 3), washers
(Figure 22, Item 5), and bolts (Figure 22, Item 4) on machine.
5. Install left bulkhead bracket. Refer to Bulkhead Bracket Installation in this work package.
Figure 22. Crossover Tubes and Clamps.
0157
END OF TASK
