TM 5-2410-240-23-3
0197
INSTALLATION CONTINUED
9. Install hose (Figure 31, Item 6) and tube nut (Figure 31, Item 5) on drive motor (Figure 31, Item 4).
10. Install four clamps (Figure 31, Item 2) on two hoses (Figure 31, Item 3).
11. Install two hoses (Figure 31, Item 3) on machine (Figure 31, Item 1) and tighten four clamps
(Figure 31, Item 2).
Figure 31. Hydraulic Tank Supply Hoses.
0197
END OF TASK
FOLLOW-ON TASKS
000197
1. Install implement pump (WP 0124).
2. Install winch (WP 0265).
3. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
0197-27/(28 blank)
