TM 5-2410-240-23-3
0267
INSTALLATION CONTINUED
N OT E
Remove caps or plugs from hoses and open ports.
Install hoses as noted during removal.
25. Apply lubricating oil on two new O-rings (Figure 10, Item 1).
26. Install two new O-rings (Figure 10, Item 1) on hoses (Figure 10, Items 7 and 8).
27. Install two hoses (Figure 10, Items 7 and 8), four clamps (Figure 10, Item 3), eight washers (Figure 10, Item 4),
and bolts (Figure 10, Item 5) on hydrostatic drive motors (Figure 10, Items 2 and 6).
Figure 10. Hoses on Hydrostatic Drive Motors.
0267
END OF TASK
FOLLOW-ON TASKS
000267
1. Install implement pump (WP 0124).
2. Set up and adjust winch piston pump (WP 0034).
3. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
0267-11/(12 blank)