TM 5-2410-241-23-1
0053
WARN I N G
Make sure master battery switch is in OFF position before replacing NATO slave and
cables. Failure to follow this warning may result in injury or death to personnel or damage
to equipment.
NATO SLAVE REMOVAL
00053
1. Remove screw (Figure 1, Item 4), washer (Figure 1, Item 3) and tether (Figure 1, Item 5) from NATO slave cap
(Figure 1, Item 2). Place tether aside.
2. Remove NATO slave cap (Figure 1, Item 2) from NATO slave (Figure 1, Item 1).
Figure 1. NATO Slave Cap.
0053
