TM 5-2410-241-23-2
0075
INSTALLATION CONTINUED
7. Position harness (Figure 6, Item 9) on machine.
N OT E
Install bolts as noted during removal.
8. Install cooling manifold (Figure 6, Item 11), clip (Figure 6, Item 8), eight washers (Figure 6, Item 7), and bolts
(Figure 6, Item 6) on engine (Figure 6, Item 12).
9. Install fitting (Figure 6, Item 2) on cooling manifold (Figure 6, Item 11).
10. Install fitting (Figure 6, Item 3) on fitting (Figure 6, Item 2).
11. Install O-ring (Figure 6, Item 5) and plug (Figure 6, Item 4) on cooling manifold (Figure 6, Item 11).
12. Install coolant temperature sensor (Figure 6, Item 10) on cooling manifold (Figure 6, Item 11).
N OT E
Install electrical connectors as tagged during removal.
13. Connect connector (Figure 6, Item 1) on coolant temperature sensor (Figure 6, Item 10).
Figure 6. Coolant Temperature Sensor.
0075
END OF TASK
FOLLOW-ON TASKS
00075
1. Install water temperature regulator (WP 0074).
2. Install aftercooler housing (WP 0068).
3. Verify correct operation of machine (TM 5-2410-241-10).
END OF TASK
END OF WORK PACKAGE