TM 5-2410-241-23-2
0106
VALVE MECHANISM BASE AND INJECTOR HARNESS INSTALLATION CONTINUED
000106
N OT E
Tighten bolts in sequence shown in (Figure 11).
4. Install new gasket (Figure 11, Item 3) on valve mechanism cover base (Figure 11, Item 2).
5. Install valve mechanism cover base (Figure 11, Item 2), eight sleeves (Figure 11, Item 4), isolators (Figure 11,
Item 5), washers (Figure 11, Item 6), and bolts (Figure 11, Item 1) on machine. Tighten bolts in sequence
shown in (Figure 11) to 21 lb-ft (28 Nm).
Figure 11. Valve Cover Base.
00106
