TM 5-2410-241-23-2
0159
JUNCTION BLOCK TO FUSE PANEL POWER CABLE REMOVAL CONTINUED
N OT E
Note cable routing to aid installation.
Tag and mark all electrical connections to aid installation.
7. Remove locknut (Figure 7, Item 2), washer (Figure 7, Item 1), and clamp (Figure 7, Item 3) from junction block
power cable (Figure 7, Item 4). Discard locknut.
8. Remove locknut (Figure 7, Item 7) and washer (Figure 7, Item 8) from machine. Discard locknut and position
clamp (Figure 7, Item 6) aside.
9. Remove clamp (Figure 7, Item 5) from junction block power cable (Figure 7, Item 4).
10. Position cover (Figure 7, Item 9) aside.
11. Remove nut (Figure 7, Item 10), washers (Figure 7, Item 11), and junction block power cable (Figure 7, Item 4)
from junction box (Figure 7, Item 12).
12. Remove junction block power cable (Figure 7, Item 4) from machine.
Figure 7. Fuse Panel Cable.
0159
END OF TASK
CLEANING AND INSPECTION
000159
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
