TM 5-2410-241-23-2
0187
DISASSEMBLY CONTINUED
N OT E
Steps 45 - 48 will disassemble one internal pipe assembly. Follow same steps for
additional internal pipe assembly.
Note orientation and position of internal pipe, filter support, and O-rings to aid assembly.
45. Remove two O-rings (Figure 22, Item 4) from block (Figure 22, Item 5). Discard O-rings.
46. Remove two O-rings (Figure 22, Item 6) from filter support (Figure 22, Item 1). Discard O-rings.
47. Remove pipe (Figure 22, Item 3) from filter support (Figure 22, Item 1).
48. Remove two O-rings (Figure 22, Item 2) from pipe (Figure 22, Item 3). Discard O-rings
.
Figure 22. Hydraulic Tank Internal Pipes.
0187
END OF TASK
CLEANING AND INSPECTION
000187
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK