TM 5-2410-241-23-2
0193
REMOVAL CONTINUED
8. Remove nut (Figure 3, Item 1), washer (Figure 3, Item 2), and two spring tension clips (Figure 3, Item 3) from
hose (Figure 3, Item 5).
9. Remove two spring tension clips (Figure 3, Item 3) and grommet (Figure 3, Item 4) from hose (Figure 3,
Item 5).
10. Remove four bolts (Figure 3, Item 6), washers (Figure 3, Item 7), and hose (Figure 3, Item 5) from main
hydraulic control valve (Figure 3, Item 8). Remove hose from machine.
11. Remove preformed packing (Figure 3, Item 9) from hose (Figure 3, Item 5). Discard preformed packing.
Figure 3. Main Hydraulic Control Valve.
0193
END OF TASK
CLEANING AND INSPECTION
000193
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK