4
TM 5-2410-241-23-3
FIELD MAINTENANCE
-
RIPPER MANIFOLD REPLACEMENT
0213
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
References
Tools and Special Tools
0
0
Tool Kit, General Mechanic's
0
(WP 0302, Item 65)
Personnel Required
0
0
Gloves, Rubber (S0208)
Two
(WP 0302, Item 68)
0
0
Goggles (S0209) (WP 0302, Item 68)
Equipment Condition
0
0
Materials/Parts
Machine parked (TM 5-2410-241-10)
0
0
Hydraulic system drained (WP 0184)
Cap Set, Protective (WP 0303, Item 4)
0
0
Rag, Wiping (WP 0303, Item 24)
Drawing Required
0
0
Tag, Marker (WP 0303, Item 34)
0
TM 5-2410-241-24P, Figure 75
0
O-ring (12)
0
Estimated Time to Complete
0
3.0 Hr
0
REMOVAL
000213
WARN I N G
Oil should be warm to ensure it drains competely. Use caution to protect against burns,
l
when draining oil.
Contact with oil can damage skin. Wear gloveswhen handling oil. If oil contacts skin, wash
it off immediately.
Lubricating oil is very slippery. Immediately wipe up any spills.
At operating temperature, the hydrauic tank is hot and under pressure.
l
Hot oil and components can cause personal injury. Do not allow hot oil or components to
contact skin.
Remove the filler cap slowly only when theengine is stopped, and the filler cap is cool
enough to touch with your bare hand. Remove the filler cap slowly to relieve pressure.
Failure to follow these warnings may cause injury or death to personnel.
N OT E
Care must be taken to ensure that fluids ae contained during performance of inspection,
r
maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid
with suitable containers before opening any compartment or disassembling any
component containing fluids.
Dispose of all fluids accordingto local regulations and mandates.
Tag and identify all hoses to aid installation.
0213-1