TM 5-2410-241-23-3
0212
INSTALLATION CONTINUED
4. Install valve bank (Figure 25, Item 3), four washers (Figure 25, Item 6), and bolts (Figure 25, Item 5) to valve
bank bracket (Figure 25, Item 8).
5. Install new O-ring (Figure 25, Item 2), hose (Figure 25, Item 7), and tighten tube nut (Figure 25, Item 1) on
valve bank (Figure 25, Item 3).
6. Remove lifting device and bracket link (Figure 25, Item 4) from valve bank (Figure 25, Item 3).
7. Install cab (WP 0245).
Figure 25. Control Valve Mounting.
0212
8. Install steering control link (Figure 26, Item 1) two washers (Figure 26, Item 3) and new cotter pins (Figure 26,
Item 4) on steering control pivot (Figure 26, Item 2) and valve bank.
Figure 26. Connecting Steering Control Link.
0212